Plate cleaning and protection

Keeping the sheets clean is one of the important conditions for maintaining a high heat transfer coefficient. Between the plates, the medium moves along the narrow and meandering flow path. Even if a relatively thick scale laye...+ More

Causes and solutions for large pressure drop of brazed plate heat exchanger

Causes of large pressure drop in plate heat exchangers 1. the operating system pipeline is not properly purged, especially in the new installation system pipeline, many dirt (such as welding slag) into the interior of the pla...+ More

What are the effects of corrosion on brazed plate heat exchangers

Stainless steel sheet is mechanically cold stamped, can not prevent a certain amount of residual residual stress remaining, for the non-molybdenum stainless steel sheet, the elimination of residual stress is very difficult. After...+ More

What are the characteristics of brazed plate heat exchangers

(1) small and efficient: because the heat transfer process is carried out in a 0.5mm thin plate, it has a high heat transfer efficiency, the heat transfer efficiency after the couplet is more than 90%. (2) Dust is difficult t...+ More

Analysis of common faults in the operation of brazed plate heat exchanger

1. Seepage leakage of plate heat exchanger Because the plate heat exchanger has a long sealing perimeter and a thinner plate, it may show a leaking appearance during the application process. Leakage appearance can be divided ...+ More

Brazed plate heat exchanger process requirements

1) pickling temperature: increasing the pickling temperature is conducive to improve the descaling effect, if the temperature is too high, it will aggravate the corrosion of the acid washing plate on the heat exchanger plate, t...+ More